Each command string begins with an STX (02) character and ends with an ETX (03) character.
DVR1 Controls DVR1 Playback Controls.4.1 DVR1 Controls Menu To view the DVR1 controls menu, at the Keyboards multiplexer main menu, select recorder controls, then DVR1 controls.
Output signal of the DVR1 is switched to MON.Philips is a registered trademark of Philips Electronics.1.2 Required Software Version Ensure that the DVR1 and REO monitors software version is equal to or higher than noted below.When this screen is selected, the DVR1 output signal switche.Softkey Functions Exit Presents the previous keyboard menu (DVR1 controls).If using the REO Multiplexer, ensure that the Record mode is set to Multiplexing (verify this via the REO Main Menu Settings VCR).It is fully future proof as it supports 1080p signals from all sources.
Full HD 1920x1080p output, this is the highest resolution of HD sources for the best possible picture quality.
This new pcb5.0e willem eprom programmer manual software simplifies retrieval of the DVR1s recorded video via the IntuiKey keyboard.
If you are not familiar with the operations of the DVR1 and the REO Monitor, refer to the corresponding instruction manuals.
Pause, Play Forward, Play Reverse, Equivalent to the DVR1s front panel buttons.When listening to your music or watching movies, you will feel the explosive power of dazzling special effects and hear every sound as the artist or director intended.The Baud Rate should be set at 9600 Baud, with 1 Stop Bit, 8 Data Bits, and Parity at None.Record programing from your over-the-air TV antenna.2002 by Philips Communication, Security Imaging, Inc.Frame Advance, Frame Reverse,.Notation Used in ascii Character of Hex Value Entered Value Column Desired Value into Command String Year Character #1 y1 0 30 Year Character #2 y2 0 30 Month Character #1 m1 1 31 Month Character #2 m2 2 32 Day Character #1.The multiplexer will enter the VCR View mode.Enjoy movies, pictures, infotainment and other online content directly on your TV whenever you like.