Cover your object thoroughly then leave it to dry for a minimum of one hour.
When the entire crackle finish is dry, seal the piece with a coat of acrylic polyurethane.
Ensure the surface of the object you are painting is smooth (a light sanding may be required clean and suitably primed if needed.
After the crackle has dried at least 72 hours, apply Clear Protector to protect the surface).When you are happy with the finish, leave this over night and then apply the.Read directions on both products before beginning.Apply your first colour of vinyl matt emulsion.Rust-Oleum Crackle Base Coat then brush this on in the same direction as your first coat of emulsion.The depth of crackle can be controlled by building up layers of top-coat.Whatever you do dont use a water-based varnish instead as this will react with the crackle base.Remember to make sure at this point charles county emplyee's manual is that you dont overwork the top coat apply it in one pass of the brush only, otherwise it can mix with the crackle base and spoil the finish.If you make a mistake, dont panic just wash off the second coat of emulsion learn to drive a manual car adelaide and the crackle base coat with a damp cloth before it dries and start over.Where possible, try to have your object laying flat to dry.It produces a distressed, vintage look that complements any piece of furniture or interior decoration.This should be applied as quickly as possible because the crackling starts almost immediately.
It is most important that you use water-based emulsion paints for the overall effect to work properly.
The thickness of the second coat of emulsion determines the size of the cracks so you need to try and make this as even as possible over your surface.
Apply your second coat of emulsion.
A great tip is to practice this technique on a test piece a couple of times before you start your project.The first coat of emulsion should be brushed out and laid off in one direction as this determines the directional lines in the crackle.(optional pokemon light platinum pre patched rom to further distress the dried weathered crackle and emulate an even more worn finish, try rubbing off edges or sanding through the dried latex top coat.Spruce up your tired furniture with a simple vintage, crackled paint effect to get this must-have interior style.Be ready, as once you start theres no stopping!Leave the first coat of emulsion to dry the drying time will depend on the type of emulsion youve used but its usually around two hours.Rust-Oleum Crackle two component system in conjunction with any regular, matt emulsion paint.White glue may also be used as a crackle-glaze medium.Photo By: James Calloway.Love the shabby chic trend?